Normalised steel plate S275N is a kind weldable fine grain structural steel which shall be under normalized or normalized rolled delivery condition.Generally The steel grades in EN 10025-3,S275N,S275NL,S355N and S355NL shall be classified as non-alloy quality steels,and S420N,S420NL,S460N and S460NL shall be classified as alloy special steels according to EN 10020.For the name of S275N steel plate,S is for structural steel,275 is the minimum yield strength value for S275N when rolling,L is for low temperature impacting test under minus 20 centigrade.
Technical Requirements & Additional Services:
Low temperature impacting test
Rolling under standard NACE MR-0175 (HIC+SSCC)
Ultrasonic test under EN 10160,ASTM A435,A577,A578
Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
Shot blasting and Painting,Cutting and welding as per end user’s demands
Mechnical property for S275N Structural steel:
Thickness (mm) | ||||||||
S275N | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 ≤ 150 | > 150 ≤ 200 | > 200 |
Yield strength (≥Mpa) | 275 | 265 | 255 | 245 | 235 | 225 | 215 | 205 |
≤ 100 | > 100 ≤ 200 | > 200 | ||||||
Tensile strength (Mpa) | 370-510 | 350-480 | 350-480 |
Main chemical elements composition of S275N | ||||||
C | Si | Mn | P | S | Nb | V |
0.18 | 0.40 | 0.50-1.50 | 0.030 | 0.025 | 0.05 | 0.05 |
Al(total) | Ti | Cr | Ni | Mo | Cu | N |
≥0.02 | 0.05 | 0.30 | 0.30 | 0.10 | 0.55 | 0.015 |
You may also leave contact information, we will contact you as soon as possible!
Tel: 0086(371)86.15.18.27
E-Mail: [email protected]
Address: Development Zone, Zhengzhou, China